Maestro Invader Distortion
The Maestro Invader Distortion at Sound Centre is a high-gain, all-analog modern distortion pedal with a heavy, aggressive, dominant sonic character and loads of rich harmonics.
With the Maestro Invader Distortion, users can generate a wide range of distorted sounds. The 3-knob control layout gives users intuitive control over Gain (distortion amount), Tone, and output Level, with more than enough volume on tap to easily exceed unity gain when you want to.
Users can also engage a built-in noise gate with the top panel toggle switch. An internal trim pot mounted on the circuit board inside the pedal allows the user to adjust the level of the noise gate's Threshold.
The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active.
- Controls - Gain, Tone, Level; internal Noise Gate Threshold trim pot
- Switches - True Bypass footswitch, Gate On/Gate Off toggle switch
- Led Indicators - Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
- Signal Processing - All-Analog
- Power Requirements - 9V battery or regulated 9VDC power supply (5.5 x 2.1 mm plug, wired center-negative)
- Current Draw - 56.7 mA
- Power On Switch - Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
- Input Impedance - 100 kOhms
- Output Impedance - 100 Ohms
- Switching Type - True Bypass
- Dimensions - 5.04" x 3.45" x 2.5" (128.0 mm x 87.6 mm x 63.5 mm)
- Weight - Net: 1.24 lb. (562.5 gm.) Gross: 1.62 lb. (734.8 gm.)
Availability (Please click here for availability info):
STANDARD OR EXPRESS SHIPPING AVAILABLE AUSTRALIA WIDE
Get great standard or express shipping rates on orders under $250 - or our FREE SHIPPING offer is available on non-bulky orders over $250! - READ MORE
The Maestro Invader Distortion at Sound Centre is a high-gain, all-analog modern distortion pedal with a heavy, aggressive, dominant sonic character and loads of rich harmonics.
With the Maestro Invader Distortion, users can generate a wide range of distorted sounds. The 3-knob control layout gives users intuitive control over Gain (distortion amount), Tone, and output Level, with more than enough volume on tap to easily exceed unity gain when you want to.
Users can also engage a built-in noise gate with the top panel toggle switch. An internal trim pot mounted on the circuit board inside the pedal allows the user to adjust the level of the noise gate's Threshold.
The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active.
- Controls - Gain, Tone, Level; internal Noise Gate Threshold trim pot
- Switches - True Bypass footswitch, Gate On/Gate Off toggle switch
- Led Indicators - Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
- Signal Processing - All-Analog
- Power Requirements - 9V battery or regulated 9VDC power supply (5.5 x 2.1 mm plug, wired center-negative)
- Current Draw - 56.7 mA
- Power On Switch - Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
- Input Impedance - 100 kOhms
- Output Impedance - 100 Ohms
- Switching Type - True Bypass
- Dimensions - 5.04" x 3.45" x 2.5" (128.0 mm x 87.6 mm x 63.5 mm)
- Weight - Net: 1.24 lb. (562.5 gm.) Gross: 1.62 lb. (734.8 gm.)
About the Sound Centre
Sound Centre was established in 1986 by a group of Western Australian musicians who wanted to provide a music store that would understand and cater to the needs of other musicians. From humble beginnings as a small shop and a few rehearsal rooms, Sound Centre has grown into Perth’s most extensive music store in terms of space, instrument range and musical expertise.
